Skip to content
Hearwinds Concrete

New Concrete Driveways for Frisco Homes

Prep it, then pour: a practical guide for Irving

Concrete Driveways in Irving

Request your driveway estimate

A stamped concrete patio behind a home in Frisco

Thinking about a new concrete driveway in Irving? Start with a tape measure and a few good questions. Hearwinds Concrete is a referral service. We pass your request to an independent provider in our network, and the provider does the work. This page covers what to ask, how the call works, what drives price, and which jobs you can handle yourself before the pros arrive.

Questions worth asking before a slab goes down in Irving

Grab a notepad. A short chat with a provider tells you a lot. Here is what to ask:

  • What goes under the slab, and how deep is that base?
  • Will the concrete have rebar or wire mesh inside?
  • Where will the control joints go, and why there?
  • How will rain run off toward the street and away from the house?
  • What is the curing plan, and when can cars drive on it?
  • Who removes the old surface, and where does the debris go?
  • Is the quote in writing, with the scope listed line by line?

You do not need to judge every answer. A clear, calm reply is a good sign. A vague one is a reason to keep talking to other providers.

Request Service

How the referral call works

Here is who does what. Hearwinds Concrete is a referral service. Providers do the pouring. Hearwinds Concrete does not.

You send a short request, or you can Request a callback to check provider availability. Share the basics: roughly how big the driveway is, what is there now, and what you want next. Mention if you have a busy week, a home office, or kids who need the drive for the school run.

Your request goes to an independent provider in our network that serves Irving. The provider reaches out, talks through the job, and usually sets a time to look at the site. Call hours vary by provider.

You decide whether to hire. There is no obligation. Price, schedule and contract are between you and the provider.

Request Service

What moves the price

No honest number exists until someone sees your yard. Still, typical U.S. ranges help you plan. A plain broom-finish concrete driveway often runs about $6 to $12 per square foot. Stamped or colored work can run roughly $12 to $20 or more. Tearing out an old slab can add a few dollars per square foot. These ranges vary by job and by region.

These things push the number up or down:

  • Total size and slab thickness
  • Condition of the soil and how much base material is needed
  • Slope, drainage fixes and tight access for trucks
  • Finish choice, color and edging
  • Demolition and hauling of the old driveway
  • Permits or neighborhood rules

Always get the quote in writing, and compare scopes, not just totals.

Request Service

Homes and building styles around Irving

In this region, many houses are slab-on-grade ranches with brick or vinyl siding. A new driveway should meet the garage slab cleanly and shed water away from it. Heavy downpours and tropical storm season make that slope matter more than the color.

Some older homes sit on pier-and-beam foundations. There, drainage near the crawl space vents deserves extra thought. Hot attics and sun-baked summers also mean the surface takes a beating, so ask about finish and sealing.

One note: this site is for new concrete flatwork. If you see cracks in the house foundation, that is a job for foundation repair experts, not a driveway crew. Likewise, concrete driveway repair is a different request from a fresh pour.

Why a nearby provider helps

A provider who works near Irving knows how local soil behaves after a soaking rain. They know what summer heat does to a pour schedule. Site visits are easier, and a short drive means fewer delays if a storm moves in.

Nearby providers also tend to know common neighborhood rules in general terms, such as setbacks and driveway width. Still, ask each provider to confirm what applies to your lot.

Request Service

When DIY is fine and when to call

You can safely do a lot before the truck shows up:

  • Measure the drive and sketch where cars park
  • Clear plants, bins and toys from the work zone
  • Flag sprinkler heads and buried lines
  • Plan where the family will park for a week or so
  • Photograph the current surface and drainage

Stop there for the heavy parts. Grading, base prep, forms, reinforcement, pouring and finishing need skill and speed. Concrete sets on its own schedule. Stamped concrete patios are even less forgiving, since timing affects the pattern.

Prep it, then pour. When you are ready, request an estimate and let a local provider take it from here.

Request Service

Our Services in Irving

Why Irving Chooses Hearwinds Concrete

Plain talk about who does the work

Hearwinds Concrete only connects you. An independent provider in our network handles the site visit, the quote and the pouring in Irving.

Plan around family

Tell the provider about school runs and work hours so the schedule fits your household and keeps disruption low.

Prep tasks you can handle

Measuring, clearing the area and flagging sprinklers are safe jobs for a handy homeowner before the crew arrives.

No obligation to hire

Request an estimate, compare written quotes, and take your time. Nothing is required until you choose a provider yourself.

Ready to plan your driveway?

Tell us about your driveway or patio plan and request an estimate. A local provider in the network follows up, with no obligation to hire.

No obligation
Contact

Tell us what happened

Tell us about your driveway or patio plan and request an estimate. A local provider in the network follows up, with no obligation to hire.

No obligation
Request a callback